ntg-mono

GPS coordinates of your bores and pumps

The Water Resources office records location details of bores and river pumps in the Northern Territory (NT).

Having accurate information helps with the allocation, use, management and administration of water.

If you're giving location information to Water Resources using a hand-held GPS receiver, use the following navigation settings.

Position format

This may also be called the Coordinate System.

Select UTM / UPS. Set the units to metres.

These coordinates are described as eastings and northings.

This UTM map projection shows areas using Map Grid of Australia (MGA) zones.

There are 2 zones in the NT:

  • MGA Zone 52 is west of 132º longitude
  • MGA Zone 53 is east of 132º longitude.

Providing GPS location

Map datum

From the listing of datums choose GDA94 (Geodetic Datum Australia 1994). If this datum is not available, select WGS84 (World Geodetic System 1984).

Note that WGS84 is the default datum when you buy a GPS. The difference between these datums is roughly 1m on the ground. Your GPS will be accurate to around 10m.

Recording coordinates

When you record a coordinate location, also note the MGA zone. The zone reference is displayed as 52K or 53L on the GPS.

Do not record the zone letter or the leading 0 for the easting.

For example, coordinates for the Water Resources office would be recorded as shown in this table.

ZoneOfficeEastingNorthing
52Palmerston7155678619567
53Katherine2050208398923
53Alice Springs3858397371120

The easting is noted before the northing, so a single coordinate location is recorded as: 715567, 8619567.

About GPS

For more information about GPS, go to the Geoscience Australia website.

Contact

If you have any questions, contact the Water Resources office.