The NT flag

Introduction

This section has information about long-standing rules and traditions you should follow when flying or using an image of the Northern Territory (NT) flag.

You will find information on:

The NT flag was flown for the first time at a ceremony in Darwin on 1 July 1978 marking the grant of self-government.

It includes the three official NT colours - black, white and red ochre (PMS 159) - and a stylised version of the Territory’s floral emblem, the Sturt’s Desert Rose.

The Desert Rose on the red ochre panel has seven petals with a seven-pointed star in the centre, symbolising the six Australian states and the NT.

The five white stars sitting on the black panel on the left of the flag represent the Southern Cross.

The flag was designed by Australian artist Robert Ingpen AM, whose work is well known throughout Australia.

The Northern Territory (NT) flag


Flying the NT flag

You are encouraged to fly the Northern Territory (NT) flag at your workplace or your home.

The NT flag should be used with respect and dignity.

When flying the NT flag you should:

  • raise the flag quickly
  • raise the flag no earlier than dawn and no later than dusk
  • when the flag is raised/lowered/carried in a parade everyone should be silent
  • people in uniform should salute when the flag is raised or lowered
  • flag should be flown freely and close to the top of the flagpole
  • flag rope should be tightly secured
  • illuminate the flag if flown at night.

You should not let the flag fall or lie on the ground. The flag should not be used as a cover, unless it is to be used to cover a coffin at a funeral.

How not to fly the flag

You should not fly the NT flag:

  • with another flag on the same flag pole
  • upside down even as a signal of distress
  • if it is damaged or faded
  • at night if it is not illuminated.

Australian flag

The Australian national flag takes precedence over all other national flags when it is flown in Australia.

The following rules should be followed:

  • it should be raised first and lowered last unless all flags are raised and lowered at the same time
  • it should be the same size as other flags or ensigns
  • it should be flown on a flagpole the same size as other national flags
  • when flying with one other national flag it should fly on the left
  • it should not be flown in an inferior position to flags or ensigns.

Flag order by priority

You should prioritise flags in the following order:

  1. Australian national flag.
  2. National flag of other nations in alpabetical order.
  3. State and territory flags as follows:
    • New South Wales
    • Victoria
    • Queensland
    • South Australia
    • Western Australia
    • Tasmania
    • Australian Capital Territory
    • Northern Territory.
  4. Other flags approved under the Flags Act 1953 including:
    • Aboriginal flag and Torres Strait Islander flag (in either order)
    • Defence ensigns as follows:
      • Australian Defence Force
      • Australian White
      • Royal Australian Air Force
  5. Ensigns and pennants including:
    • local government
    • Commonwealth, state and territory agencies
    • non-government organisations.

The order of priority can vary on some military occasions or establishments.

The Australian national flag can be followed in the order of priority by defence ensigns and military pennants ahead of other flags, ensigns and pennants.

Flags are flown at half-mast as a sign of mourning.

The half-mast position will depend on the size of the flag and flag pole.

The position of the top of the flag should be a third of the distance down from the top of the flagpole.

When lowering a flag from the half-mast position it should be briefly raised to the top and lowered ceremoniously.

The flag should never be flown at half-mast at night even if illuminated.

When flying the national flag with other flags, all flags should be flown at half-mast. The Australian flag should be raised first and lowered last.

The Northern Territory Government will give advice when flags are to be flown at half-mast.

Protocol NT will contact NT flag marshals by email about these occasions.

You can register to be an NT flag marshal by emailing protocol.dcm@nt.gov.au.

You should dispose of a damaged flag in a private and dignified way.

Example 1:

Image showing the NT flag, the Australian flag and an unidentified flag. The Australian flag is in a higher position than the other two flags.

Example 2:

Image showing, the Australian flag, the NT flag and an unidentified flag

Example 3:

Image showing the NT flag and the Australian flag in front of a building

Example 4:

Image showing the Australian flag located above the NTG flag in front of a building

Example 5:

When the flag is displayed vertically against a wall or door the flag may appear to be in reverse. This is the correct way to hang the flag in this instance.

Image of the NT flag displaying vertically against a door

Example 6:

If hanging the Australian flag and the NT flag on a wall or in a landscape format the Australian flag should always be on the left and the NT flag on the right (when standing in front facing the wall).

Image of the Australian and the NT flags hanging next to each other on a wall.


NT flag colours and design

The NT flag and images of it are protected by the Flag and Emblem Act 1985.

If you use an image of the NT flag for advertising or promotional purposes, you must get approval.

To get approval, contact the Director of Protocol NT by emailing protocol.cmc@nt.gov.au or calling 08 8999 6238.

The NT flag can only be reproduced in full colour and in a 2:1 ratio.

You can't re-scale or manipulate the size of the flag in any way that changes its original dimensions. It should not be defaced by overprinting with words or illustrations.

Only the official colours of the NT flag can be used: black, white and red ochre (PMS 159) for any images or reproductions of the NT flag.

Download approved flag images .

Colour codes

Colour CMYK Pantone® RGB (HEX)
NT flag color - Red ochre  1 / 74 / 100 / 7 Pantone® 159 C #C75B12
NT flag color - Black  0 / 0 / 0 / 100 Pantone® Black C #000000

Correct design and colours

If you're using the flag image, you must use it in its entirety. It should not be defaced by overprinting with words or illustrations.

NT flag

NT flag specifications

The NT flag consists of 2 main parts:

  • Southern Cross in the first and third quarters
  • stylised Desert Rose in the second and fourth quarters.

The stars on the black panel of the NT flag represent the 5 stars of the constellation of the Southern Cross.

The points on the Southern Cross stars on the NT flag differ slightly to the Southern Cross stars on the Australian Flag.

Get NT flag specifications PDF (470.5 KB).


Download flag images

You can use the Northern Territory (NT) flag or an image of the flag for business or advertising, but there are some rules you need to follow:

  • use it in a respectful way
  • make sure it's shown correctly and accurately
  • don't deface it by overprinting with words, illustrations or objects
  • make sure all symbols are clearly visible and recognisable
  • use the official NT flag colours.

Protocol NT endorses the proper use of the NT flag, contact Protocol NT.

Approved flag images for use

FlagVector EPSJPEG
NT and Australian flag CMYK EPS (1.8 MB)
RGB EPS (2.5 MB)
Pantone® EPS (1.9 MB) 
CMYK JPG (1.0 MB)
RGB JPG (565.0 KB) 
NT flag - flat version CMYK EPS (1.1 MB)
RGB EPS (991.4 KB)
Pantone® EPS (1.1 MB)
CMYK JPG (624.7 KB)
RGB JPG (68.9 KB)
NT flag - flying version 1 CMYK EPS (1.3 MB)
RGB EPS (1.1 MB)
Pantone® EPS (1.3 MB) 
CMYK JPG (815.5 KB)
RGB JPG (232.1 KB)
NT flag - flying version 2 CMYK EPS (1.4 MB)
RGB EPS (1.2 MB)
Pantone® EPS (1.4 MB)
CMYK JPG (810.4 KB)
RGB JPG (231.1 KB) 
NT flag - flying pole version CMYK EPS (1.6 MB)
RGB EPS (1.4 MB)
Pantone® EPS (1.6 MB) 
CMYK JPG (863.7 KB)
RGB JPG (264.4 KB)

Contacts

Phone

08 8999 6238

Contact Form

If you need information on flying flags or how to get permission to use an image of the NT flag please fill in this form to contact Protocol NT.